SmartSolar Charge Controllers with VE.Can interface MPPT 150/70 VE.Can

SmartSolar Charge Controllers with VE.Can interface MPPT 150/70 VE.Can

SCC115070210

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98 %.

Flexible charge algorithm

Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high.

PV short circuit and PV reverse polarity protection. PV reverse current protection.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers.

VE.Direct or VE.Can

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

VE.Can: the multiple controller solution

Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth

Remote on-off

To connect for example to a VE.BUS BMS.

Programmable relay

Can be programmed to trip on an alarm, or other events.

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Optional: pluggable LCD display

Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Specifications:

Battery Voltage: 12/ 24/ 48V Auto Select (software tool need to select 36V)

Rated charge current: 70A

Nominal PV Power Input: 12V: 12V:1000W / 24V:2000W / 36V: 3000W / 48V: 4000W

If more PV power is connected, the controller will limit input power and The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V.

Max. PV short circuit voltage: 50A

Maximum PV open circuit voltage: 150V (145V start-up and operating max)

Maximum efficiency: 98%

Self-consumption: Less than 35mA @ 12V / 20mA @ 48V

Charge voltage 'absorption': Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth)

Charge voltage 'float': Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable: rotary switch, display, VE.Direct or Bluetooth)

Charge voltage 'equalization': Charge voltage 'equalization' Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable)

Charge algorithm: multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm

Temperature compensation: -16 mV / -32 mV / -64 mV / °C

Protection: Battery reverse polarity (fuse, not user accessible), PV reverse polarity / Output short circuit / Over temperature

Operating temperature: -30 to +60°C (full rated output up to 40°C)

Humidity: 95%, non-condensing

Maximum altitude: 5000m (full rated output up to 2000m)

Environmental condition: Indoor, unconditioned

Pollution degree: PD3

Data communication port: VE.Can, VE.Direct or Bluetooth

Remote on/off: Yes (2 pole connector)

Programmable relay: DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC

Parallel operation: Yes, parallel synchronised operation with VE.Can (max. 25 units) or Bluetooth (max. 10 units)

Encloser Colour: Blue (RAL 5012)

PV terminals: 35 mm² / AWG2 (Tr models)

Battery Terminal: 35mm² / AWG2

Protection category: IP43 (electronic components), IP22 (connection area)

Weight: 3kg

Dimensions (h x w x d) in mm: Tr models: 185 x 250 x 95 mm

Safety Standards: EN/IEC 62109-1, UL 1741, CSA C22.2