MeanWell 200W 12V DC/AC Inverter True Sine Wave

MeanWell 200W DC/AC Inverter True Sine Wave   

INPUT: 10.5-15 VDC       

OUTPUT: 230 VAC / 50 HZ

Features:

• True sine wave output (THD<3%)
• High surge power up to 400W
• High efficiency up to 88%
• Power ON-OFF switch
• Fanless design, cooling by free air convention
• LED panel indicating operational status
• Bat. low alarm/Bat. low shutdown/Over voltage/Over temp./Output short/Input polarity reverse/Over load protections
• Type D AC Output Receptacles stocked as standard

TS-200 Series are high performance DC/AC power inverters released to cover lower wattage applications. Using high frequency circuit topology this true sine wave inverter has efficiency up to 88%. Capable of providing 200W continuously as well as a peak load of 230W for 180 seconds, 300W for 10 seconds or 400W surge power for 30 utility cycles. The output AC voltage and frequency of TS-200 can be easily adjusted via the front panel. TS-200 is suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor.

Rated Power: 200W

Maximum Output Power: 230W for 180 sec. / 300W for 10 sec./ surge power 400W for 30 cycles

Output Frequency: 230VAC 50±0.1Hz 50/60Hz selectable by setting button

Waveform True sine wave (THD<3%) at rated input voltage

AC Regulation: ±3.0%

Front Panel Indicator Operation status: Green : normal, Orange(flashing) : remote control OFF, Red : abnormal

Input Off Mode Current Draw: <1mA

Battery Types Open & sealed Lead Acid

Battery Polarity By internal fuse open.

Over Temperature Protection: Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power MOSFET.

Output Short Protection: Shut down o/p voltage, re-power on to recover.

Over Load Protection: 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Shut down o/p voltage, re-power on to recover.

GFCI Protection Optional on 110VAC models, Type F only

Working Temperature: 230VAC -10°C ~ +40°C full load, +60°C 50% load

230VAC -10°C ~ +40°C full load, +60°C 50% load

Working Humidity 20% ~ 90% RH non-condensing

Vibration: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes

Safety Standards: 110VAC model design refers toUL458

LVD: 230VAC model refers to EN60950-1

Withstand Voltage: Bat I/P-AC O/P:3.0KVAC AC O/P- FG:1.5KVAC

Isolation Resistance: Bat I/P-AC O/P,AC O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH

EMC: 230VAC models comply to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EN61000-4-2,3,8 ENV50204

Dimensions: 205 x 158 x 59mm