5ft Double Vapour Proof Fitting IP65, 2 x22W T8, Emergency Backup 1 Tube 30% for 120 minutes - FAST reCharge

30% light output for 120 minutes / 2hr duration on ONE Lamp only Emergency back-up battery (out of two that are normally on).

Options: Maintained (designated emergency tube always on) / Non-maintained (only comes on in an emergency)

Default setup is fitting normally runs with both Tubes on, until power failure after which 1 tube remains on via Emergency back-up battery (called the maintained state).

Recharge - Fast Charge, 6 hours.

Spec of EACH TUBE is normally but may vary slightly:

Power (watts): 24w

Light output (lumens): 2400 lm approx.

Expected Life (hours): 30000 Hours

Colour temperature (CCT): 6000K Daylight (4000K available on request)

Colour rendering index (Ra): > 80

Tube Warranty: 2 Year

The kit uses the Emergency Module LEM5909 10-300v designed to provide maintained or non-maintained, emergency lighting using a variety of LED lamps(10-300Vdc) constant voltage. The LEM5909 uses Li-ion or Ni-cad battery to provide power output to the LED Emitter in emergency conditions. The kit is designed according to IEC61347-2-7.

The Vapour Proof 5ft Double Fitting:

• IP65 Dust and Moisture Proof fitting
• Mounting facility through external brackets
• Hinged opal or clear diffuser for ease of lamp replacement
• Ingress protection - IP65
• Suitable for use with occupancy sensors
• Wired for LED T8 Configuration – L/N Live Neutral connection single –side
• Suitable for underground car parks, cold rooms, freezer rooms (-20 degrees C)
• Emergency conversion (optional)
• Unit size (LxWxH) – 1560 x 100 x 76

The luminaries consist of an injection-moulded flame-retardant polycarbonate housing and prismatic or opal diffuser. The powder coated white reflector and control gear tray, upon which all electrical components are mounted, are secured by means of multiple twist lock latches to secure the reflector to the housing. The silicon sponge seal is moulded into the housing to ensure an optimal seal between the housing and the diffuser.