Input voltage range: 200-265 V
Charge voltage ‘absorption’: 14,4 or 14,7 V
Charge voltage ‘float’: 13,6 V
Charge voltage ‘storage’: 13,2 V
Battery capacity range: 1,2 Ah – 30 Ah
Charge current: 4A max or 0,8A
Can be used as power supply: No (output relay)
Back current drain: 0,25 Ah/month (0,3 mA)
Protection: Reverse polarity, temperature
Operating temp. range: -20 to +40°C (full rated output up to 25°C)
Humidity (non condensing): Max 95 %
Material & Colour: PC Black
Battery-connection: Black and red cable of 1,2 meter. Connects to battery clamps, M6 eyelets or 12 V plug (included)
230 V AC-connection: Cable of 1,5 meter with CEE 7/7 plug
Protection category: IP65
Weight: 0,56 kg
Dimensions (h x w x d): 42 x 61 x 185 mm
Safety EN 60335-1, EN 60335-2-29
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the
Less maintenance and aging when the battery is not in use: the Storage Mode:
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the
storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a
week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents
stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating and reverse polarity connection:
The output current will reduce as temperature increases up to 40°C, but the charger will not fail.
Output relay protects against reverse polarity connection.
Five LED’s for status and mode indication:
When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output.
After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge
profiles with the MODE button:
Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.
Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge
voltage (OPTIMA spiral cell batteries for example).
Until the battery is fully charged, the red LED CHARGE will be on.
After completion of the charge process, the red LED FULL will be on.
In case of reverse polarity connection, the red LED ! will be on
If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is
The charger always starts in STANDBY mode when connected to the AC supply.