Philips TrueForce High Bay retrofit, 140W, E40

Philips TrueForce LED highbay lamps give you a quick and easy payback solution to replace HID lamps in Highbay application. The solution gives you the LED benefits of energy-efficiency and

long-lifetime, plus they come for a low initial investment. Lamp design allows directly retrofit HID lamps with TrueForce LED highbay lamps without changing the fixtures or gear. This feature also allow system with ignitor failure or without ignitor to continue working, meanwhile, main voltage input solution is also available. Multiple beam angle options and high colour rendering index enhance the lighting distribution while creating a comfortable, safe and high productivity environment.

Benefits:

• Cost saving with quick payback, up to 90% energy saving
• Easy adoption
• Low initial investment

Features:

• High energy efficiency with directional light
• Long lifetime 50,000hrs and 80,000hrs with sensor condition
• Main voltage input, 120-277Vac
• 2 beam angles 60/120 degree
• Pleasant white light with CRI 80

Applications:

• Industrial - Factories, Warehouses, Distribution centres
• Retail - Hyper markets, Shopping malls
• Others - Transportation hubs, Convention centres, Sports halls

Lumen Output: 20000 LM

Wattage: 140W

LM per Watt: 140+

Kelvin Colour Temp: 6500 stocked (4000K available on request with leadtime)

CRI: 80

Beam Angle: 120 (60 optional on order)

Base: E40

LED Lifetime: 50000 hrs

Voltage Input: 120-277 / 50-60 Hz

Dimms: 285mm long by 250mm diameter

Weight: 1500g (approx)

WARNINGS & CAUTIONS

• Always switch off the power supply before commencing work!
• The LED lamp is suitable for direct main voltage input.
• The LED lamp is NOT compatible with dimmers.
• Suitable for use in operation temperature range between -20°C to 45°C.
• If LED lamp is being use within luminaire, the minimum dimensions requirement on lamp compartment is

(HxO) 300mm X 406mm. If the luminaire comes with a glass/cover, it's recommended to detach it for

optimal light efficiency and product lifetime. Please check the Tc temperature in application guide for the

best performance.

• Do not change the structure or any components of the LED lamp to ensure safety.
• The LED lamp is designed to fit in standard IEC compliant E40 lamp holders.
• The LED lamp should be installed by qualified professional electrician.
• Perform inspection before installation to ensure the luminaire/lamp holder is in good condition to carry the

weight and performance of the LED lamp.

• The LED lamps should be positioned so that prolonged staring into the luminaire at a distance closer than

Im is not expected.

• Always install the safety sling provided in the package.
• The LED lamp fulfilled IP40 requirement.
• The LED lamp is designed for general lighting service.
• Please do not apply the LED lamp in applications which contains emergency or/and explosive proof

luminaires.

• Recommend 6-12 meters height for the installation height of sensor highbay lamp.
• Default sensor delay time is 5mins, and it can adjust to I/5/10/30 mins.
• Default sensor lamp output is 20% when sensor works, and it can adjust to 0%/20%/40%/60%.
• Place heat radiating devices outside of the monitoring cone.
• Avoid drafts (e.g.from ventilators or heating systems).
• Please remove luminaire cover when use sensor high bay lamp.
• Don't press sensor top cover during installation.
• The total system performance may vary depending on the lighting/luminaire system.
• For latest information, please refer to www.philips.com/lighting
• In case of doubt, please consult Signify representative.