LED INTELLIGENT DIMMING DRIVER 75W
Available in 12V or 24V DC options.
Specifications:
Output Voltage: 12Vdc / 24Vdc
Output Voltage Range: 12Vdc ± 0.5Vdc / 24Vdc ± 0.5Vdc
Output Current: Max 6.25A (12V) / 3.125A (24)
Output Power: Max 75W
Out Power Range: 0 – 75W
Strobe level: High frequency exemption level
Dimming Range: 0 – 100%, dimming depth: 0.1%
Overload Power Limitation: >102%
Ripple & Noise: < 150 mV
PWM Frequency: 3600Hz
Input:
Dimming Interface: Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM.
Input Voltage: 200-240Vac
Frequency: 50/60 Hz
Input Current: 230Vac ≤0.4A
Power Factor: PF>0,98/230Vac, at full load
THD: 230Vac@THD<6%, at full load
Efficiency: 88% (12V)
Inrush Current: Cold Start 30A at 230Vac
Anti-Surge: L-N: 2KV
Leakage Current: max 0,5mA
Environment:
Working Temperature: -20 ~ 50 degree C
Working Humidity: 20-95% RH, Non-condensing
Storage Temp, Humidity: -40 ~ 80 degree C, 10-95% RH
Temp. Coefficient: ±0.03%/°C(0-50°C)
Vibration: 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes.
Protection:
Over-heat Protection: Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, auto recovers.
Over Load Protection: Shut down the output when current load≥102%, auto recovers.
Short Circuit Protection: Shut down the output when non-load voltage ≥13V (12V) or >26V (24V), re-power on to recover after fault condition is removed.
Over Voltage Protection: Shut down the output when non-load voltage≥26V, re-power on to recover after fault condition is removed. / Shut down the output when non-load voltage ≥13V, re-power on to recover after fault condition is removed.
Safety:
Withstand Voltage: I/P-O/P: 3750Vac
Isolation Resistance: I/P-O/P: 100MΩ/500VDC/25°C/70%RH
Safety Standards: IEC/EN61347-1, IEC/EN61347-2-13 (see PDF)
Dimensions: 293×43×30mm(L×W×H)
Packing: 296×44×33mm(L×W×H)
Weight: 350g